Product Details
Standard: API 5L PSL 1
Steel Grade:API 5L PSL 1 GR.A ,API 5L PSL 1 GR.B, X42, X46, X52, X56, X60, X65, X70
Dimension:
1)seamless
OD: 21.3-762mm WT: 2-100mm L: 5.8m, 6m, 11.8m, 12m
2)HFW/ERW
OD: 21.3-508mm WT: 3.2-15.9mm L: 5.8m, 6m, 11.8m, 12m
3)LSAW
OD: 406.4-1422mm WT: 6.4-44.5mm L: 5.8m, 6m, 11.8m, 12m
4)SSAW
OD: 219.1-2540mm WT: 5.4-25.4mm L: 5.8m, 6m, 11.8m, 12m
Can be customized according to your request
mechanical property
Standard |
Product Level |
Steel grade |
Yield Strength (min), Mpa |
Tensile Strength(MPa) |
API 5L GB/T9711.2 |
PSL 1 |
A or L210 |
210 |
335 |
B or L245 |
245 |
415 |
x42 or L290 |
290 |
415 |
X46 or L320 |
320 |
435 |
X52 or L360 |
360 |
460 |
X56 or L390 |
390 |
490 |
X60 or L415 |
415 |
520 |
X70 |
483 |
565 |
Tube chemical element table:
roduct Level |
Steel grade |
Chemical composition, % |
C |
Mn |
P |
S |
Si |
V |
Nb |
Ti |
CEpcm |
PSL 1 |
B or L245 |
≤0.28 |
≤1.20 |
≤0.030 |
≤0.030 |
- |
- |
- |
- |
- |
x42 or L290 |
≤0.28 |
≤1.30 |
≤0.030 |
≤0.030 |
- |
- |
- |
- |
- |
X46 or L320 |
≤0.28 |
≤1.40 |
≤0.030 |
≤0.030 |
- |
- |
- |
- |
- |
X52 or L360 |
≤0.28 |
≤1.40 |
≤0.030 |
≤0.030 |
- |
- |
- |
- |
- |
X56 or L390 |
≤0.28 |
≤1.40 |
≤0.030 |
≤0.030 |
- |
- |
- |
- |
- |
X60 or L415 |
≤0.28 |
≤1.40 |
≤0.030 |
≤0.030 |
- |
- |
- |
- |
- |
X70 |
≤0.28 |
≤1.40 |
≤0.030 |
≤0.030 |
- |
- |
- |
- |
- |
Dimensional tolerance:
Steel pipe type |
Steel pipe outer diameter (D) |
Steel pipe wall thickness (S) |
|
|
Tube body |
Steel pipe outer diameter (mm) |
Allowable deviation (mm) |
Steel pipe outer diameter (mm) |
Allowable deviation (mm) |
≥ 60.3 and S < 20 |
±0.75% |
≤73.0 |
+15%，-12.5% |
|
≥ 60.3 and S ≥ 20 |
±1.00% |
> 73.0 and S < 20 |
+15%，-12.5% |
|
|
|
> 73.0 and S ≥ 20 |
+17.5%，-10
|
|
We are used in pipeline testing:
1. chemical composition analysis
2. mechanical properties (tensile strength, yield strength, elongation, hardness)
3. process test (flat test, combustion test, bending test, hydraulic test)
4. surface quality inspection
5. eddy test
6. vision test
Application:
The API uses the SPEC 5L: low pressure applied to the pressurized fluid delivery conduit, the sleeve, a low-pressure, high-pressure boiler seamless, marine seamless steel, seamless steel high pressure fertilizer equipment, oil and gas industry, etc., extracted from the ground oil, gas or water to the oil and gas industry enterprises via conduit for transporting oil and gas industry, gas, water and oil.
Such as condensate pipelines, gas pipelines, jet fuel pipelines, water drainage pipe, slurry pipeline, subsea pipelines, onshore and offshore pipelines and pipelines.
Conduit includes two kinds of seamless and welded tube. Pipe end has a flat end portion, and a threaded end portion of the sleeve end portion. An end portion welded connection, connection, connection sockets and the like.
We can also produce Anti-corrosive Steel Pipe with following standards:
1 API 5L PSL1 Line Pipe with 3LPE/3LPP/2LPE/2LPP Coating:
DIN 30670-2012 Polyethylene Coatings on Steel Pipes and Fittings
DIN 30678-2013 Polypropylene coatings on steel pipes and Fittings
ISO 21809-1:2011 Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems -- Part 1: Polyolefin coatings (3-layer PE and 3-layer PP)
ISO 21809-4:2009 Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems -- Part 4: Polyethylene coatings (2-layer PE)
CAN CSA Z245.21 External Polyethylene Coating for Pipe
NFA 49-710 External Three-Layer Polyethylene Based Coating, Application by Extrusion
2 API 5L PSL2 Line Pipe with 2FBE/FBE Coating:
CAN CSA Z245.20 External Fusion Bond Epoxy Coating for Steel Pipe
ISO 21809-2:2014 Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems -- Part 2: Single layer fusion-bonded epoxy coatings
API RP 5L9 External Fusion-Bonded Epoxy Coating of Line Pipe
AWWA C213 Standard for Fusion Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines
3.API 5L PSL1 Line Pipe with Interior Liquid-Epoxy Primer Coating:
AWWA C210 Standard for Liquid-Epoxy Coating Systems for the Interior and Exterior of Steel Water Pipelines
4. API 5L PSL1 Line Pipe with Polyethelene and Polyurethene foam made Insulation line pipe:
DIN 30671-1992 Thermoset Plastic Coating For Buried Steel Pipes
Package: Beveled or straight ends with plastic caps or metal protectors, black painted, hexagonal bundled or loose packing.
JDSTEELPIPE is one of the leading China api 5l line pipe manufacturers and suppliers, if you want to buy or import best high-quality api 5l PSL1 line pipe, api 5l grade B ,API 5l x42,x46 x52,X56, X60,X65, X70,X80 PSL1 line pipe,API 5L SAW line pipe , professional company, factory, seller, and exporter, please feel free to contact us.
If you require further information or you do not see what yo need in our web,please do not hesitate to contact us. Our customer service specialists will be happy to help you.
http://www.jiade-group.com/
Company Profile
