The good weak light performance(morning,evening and cloudy day) has been tested and approved by professional third-party.
Guarantee from ±3% as power tolerance.
100% EL test before and after lamination, and finished products EL test, providing higher quality assurance.
For a period of twenty-five (25)years commencing on the Warranty Start Date, loss of power output of the nominal power output measured at Standard Test Conditions (STC) for the Product(s) shall not exceed:
1.Within a period of one (1) year from the Warranty Start Date, the module output will be at least 97% of the rated power output specified in the original product label.
2.During the next twenty-five (25) years, the module power output will degrade no more than 0.708% per year of the rated power output specified in the original product label. Therefore, at the end of the warranty period, the guaranteed module power outputwill be at least 80.008% of the rated power output specified in the original product label.
I-V Curves of PV module JYxxxM60 at different light power
60pcs (6×10) —— 5 bus bars
Voltage at Pmax (Vmp) [V]
Current at Pmax (Imp) [A]
Open-circuit voltage (Voc) [V]
Short-circuit current (Isc) [A]
Max-system voltage (VDC) [V]
No. of bypass diodes
Max. series fuse [A]
Temperature coefficient of pmax
Temperature coefficient of voc
Temperature coefficient of isc
Nominal module operating temperature(NMOT)
*STC Conditions (1000W/m²;1.5AM and 25°C cell temperature)
Cable type, diameter and length
Type of connector
PV-CO01, PV-CO02, PV-JK03M-1B, PV-JK03M-2B,
No. of Draining holes in frame
Glass:Tempered glass 3.2mm Encapsulation:EVA Back side:White
Clear anodized aluminium alloy type 6063T5 frame
Qualification Test Parameters
Dielectric insulation voltage
3600Pa for positive (downward) and 1600Pa for negative (upward)